| portablescreen | ||||
| ||||
Are you searching for projector screens but aren’t sure where to look? Click on over to our site for a full selection of projectors and screens. We have all the products and supplies you need for your school or office. Check herePicking the right resolution Here are some basic guidelines for choosing the right resolution: Pick a resolution that is adequate for your presentation. If you use mostly type presentations, you can save money by going with a lower (SVGA) resolution. If you are, however, presenting information with a lot of numeric data, you may want an XGA resolution. And for highly detailed and technical presentations, such as engineering drawings, you may need the higher resolution SXGA projector. Get a projector that matches the native resolution of your computer. If you have a computer with SVGA resolution, then an SVGA projector will give the sharpest and cleanest image. Most of the projectors today can project input signals other than their native resolution, however, there may be a loss of sharpness and detail in the process. If you have a high resolution computer and a matching resolution projector is out of your price range, choose a projector that is one step down in resolution. Projectors convert a different input format to its native output format through a process called "scaling". Some projector are very good at scaling, thus making the fuzziness in the image very minor. The quality of scaling varies among different projectors. LCD projector technology on the home theater market. Hopefully that will change sometime soon. Billed as an "all-purpose" multimedia projector, it does have a lot to offer. At only 13 lbs, this sleek little light cannon serves up screaming bright images in data and graphics, in composite and S-video, in component video, and The on-screen menu is much better than on earlier models. Each control is intuitive and easy to operate, and the menu boxes take up very little screen area. Furthermore, the menu boxes can be relocated from the upper left corner to the lower right corner to provide flexible viewing of the screen while adjustments are being made. You would think that with the heavy duty light output of 2000 ANSI lumens, an industrial strength blower would be required to cool the system. Not so. There are four color temperature options on the Three are factory preset, and the fourth you can roll your own. On our review sample, we measured the first setting at D7500, the second, at D10500, and the third at D5900. On the fourth, we found it very easy to dial in an exact D6500. ©2003 www.projector-screens.com. All rights reserved. |